赤のブログ

QRコード
カテゴリ
アクセスカウンタ
Total:568
Today:2
Yesterday:0
The temperature of the injection mold, the filling of the material flow
The temperature of the injection mold, the filling of the material flow, solidification, etc., have an important influence on the quality and productivity of the workpiece. It requires the control of the temperature control system. For example, in the injection molding process, due to the geometric shape, it is difficult to make the surface temperature around the cavity uniform, and the various cooling speeds of the workpiece may be different, which may cause uneven shrinkage and stress, affecting the quality of the workpiece. .
If the mold temperature is lower in the lower part of the mold temperature, the mold temperature is lower than the difference in the temperature of the hot water on the wall of the chamber, and then the effect of regulating the body temperature will be reached. The effect of mold temperature on productivity is obvious. The workpiece in the mold is shortened in cooling time, the injection cycle is short, and the productivity is high.
 
The first condition is of course that the part is fully formed to allow the process conditions. Hengxingchang Mould Technology Co., Ltd. is a wholly-owned enterprise integrating product appearance and structural design, injection mold, die-casting mold, silicone mold design and manufacturing, injection molding, and oil-jet silk screen integrated services. The company specializes in all kinds of precision mold design, manufacturing, precision injection molding and product cable tie mould manufacturer design; there is any need to welcome everyone
コメントエリア

まだこの記事のコメントはありません。

コメント投稿

コメント記入欄を表示するには、下記のボタンを押してください。
※新しくブラウザが別ウィンドウで開きます。

トラックバックエリア
この記事のトラックバックURL
http://www.musublog.jp/blog/trackback.php?id=236661