简约のブログ

QRコード
カテゴリ
アクセスカウンタ
Total:41342
Today:30
Yesterday:53
| 1 | 2 | 3 | 4 | 5 | 最初 | next>>
Mixed Laser Cutting Machine for Cut metal and Non-metal Materials
Mixed Laser Cutting Machine can be used for the interchange cutting of metal and non-metal materials is available. A multi-purpose machine, save costs, and accelerate your return on investment. This mixed Co2 steel sheet cutter can be used for 1-3mm carbon steel, 1-2mm stainless steel, 10-20mm wood, 20-30mm acrylic, 20-25mm density board and other plates.

Features of Mixed Laser Cutting Machine

1. Mix Cutting: The metal plate cutter supports both metal and non-metal Cutting, which can cut stainless steel, carbon steel, mild steel, also can cut acrylic, wood, MDF, PVC board, paper, fabric, etc.
2. The metal plate cutter adopts 150w / 180w / 260w / 300w Laser Tube, high power, 10000 hours long life span.
3. Adopt Japan Imported Motor and Ball Screw Transmission Rod, with fast speed and high precision.
4. This metal plate cutter adopts dynamic auto-focusing metal sheet laser cutting head: When the metal sheet is not plain, the dynamic focus laser cutting head can adjust the focusing distance automatically.
5. Advanced LCD Touch Screen+ USB port+ DSP Offline Control, which make the metal plate cutter can not only work without computer, but also connect to U disk, USB communication.
6. LCD Control System own 128M Big Memory, which can store files in the machine for engraving and cutting, compatible with AutoCAD, CorelDraw, Photoshop and some other kinds of graph disposal software.
7. This steel sheet cutter use imported high precision linear guide rail and professional optical system, dust-proof and lubricate, which improve the engraving quality and prolong machine lifetime.
8. Professional Strip work table: meets the needs of diversified laser procession;
9. Water Cooling System with Alarm Protection, adopt CW-5000 or CW-6000 Water Chiller with temperature display, which can avoid over burning, to protect the water circulation from electricity-off.
10. Equipped with luxury Consumables, USA original Focus Lens and reflect mirror, steel sheet cutter makes high efficiency and steady.
11. Red Light Pointer realizes the exact position without laser.
12. Matched Professional cutting software is particularly designed and written for both metal and non-metallic cutting, with high compatibility, support any computer operating system.
13. The steel sheet cutter can also called mdf laser cut, acrylic cutter.

Application of Mixed Laser Cutting Machine

This mixed Co2 steel sheet cutter can be used to cut Metal Materials, such as: stainless steel, mild steel, carbon steel. And can be used for Non-Metal Materials cutting and Engrave, for example: acrylic, MDF, wood, plywood, plastic, PVC, board, double color board, rubber.
 
 


Technical parameters of Mixed Laser Cutting Machine

ModelZML-1325M
Working Area1300*2500mm
Laser Power130w / 150w / 180w / 260w / 300w
Transmission & Driving SystemBelt Transmission, LeadshineStep Motor and Driving System
Laser TypeCO2 Sealed Laser Tube, 10.6um
Cooling TypeWater Cooling, 150w-180w Machine use CW-5000
260w-300w Machine use CW-6000
Working TableStainless steel table
Laser Output Control(0-100% Set by Software )
Smallest Character EngravingChinese: 2.0mm*2.0mm, English Letter: 1.0mm*1.0mm
Highest Scanning Precision4000DPI
Positioning Accuracy±0.02mm/m
Positioning Speed20m/min
Max. Cutting Thickness40mm
Max. Cutting Speed20m/min
Controlling SoftwareDSP Control System
Graphic Format SupportedBMP, PLT, DST, DXF, and AI, etc
Compatible SoftwareCORELDRAW, PHOTOSHOP, AUTOCAD, All type of AUTOCAD software
Drive SystemHigh-precision 3-phase Stepper Motor
Auxiliary EquipmentExhaust Fan and Air Exhaust Pipe
Controlling softwareOff-computer controlling system
Working voltageAC110-220V ±10%/10A,50-60HZ
Power<2000W
PackingStandard Plywood
Warranty12 month for whole machine, 10 month for laser tubes
TrainingVCD Training
Weight1000 kg
The difference between advertising carving machine and woodworking carving machine
When many customers purchase carving machines, they often ask such a question: what is the difference between advertising carving machines and woodworking carving machines? As a professional engraving machine R & D manufacturer, answer for you: advertising engraving machine and woodworking engraving machine are essentially no different.

These two models are just a vague definition of the engraving machine manufacturer according to the application scope of the engraving machine. Generally speaking, the advertising engraving machine table is small (the processing breadth is small), generally uses the lead screw drive, the spindle motor power is also small. The table top of woodworking carving machine is large (the processing breadth is large).

Generally driven by rack, the power of spindle motor is also large. Tip you: when purchasing a carving machine for selection, the key is to see what you want to carve, how large the size, and how high the precision is required. If you carve PVC, acrylic board, hibiscus board, double color board and other materials that are often used in advertising, you can choose an advertising carving machine.

If it is mainly carving density board, wood board, relief, mahogany processing, etc., choose woodworking carving machine. Our company specializes in the production of advertising engraving machine, woodworking engraving machine and other CNC engraving machine equipment, providing CNC engraving comprehensive solutions, welcome customers to come to buy.
Wood CNC Side drilling Machine RC 2400
 The Wood CNC Side drilling Machine RC2400 is a special design for the side drilling of Plate Furniture working. Wood CNC Side drilling Machine RC2400’s Work can be achieved through scanning the barcode. After briefly training for inexperienced workers, they can directly operate. Lower labor costs. The Wood CNC Side drilling Machine RC2400 no need repeatedly adjusting, greatly improving the drilling efficiency
 

 
Wood CNC Side drilling Machine RC2400 used for horizontal perforated plate custom furniture. Completely replace the traditional drill, to get rid of the traditional punching mode. Dependence on skilled workers, it scans code processing directly. Wood CNC Side drilling Machine RC2400’s parts: adopt Taiwan linear guide domestic ball screw; Taiwan reducer. Reasonable design: independent computer control: operation and maintenance more convenient. Wood CNC Side drilling Machine RC2400 has three working areas processing three different size plates at the same time with high efficiency. Automatic oil lubrication system: prolong the service life of the machine.
 

3:Performance parameter
X,Y,Z Working Area 2440*1220mm
Table Surface Vacuum table
Frame   Heavy welded steel tube
Structure    Heavy welded steel tube
Control System     Delta PLC
Inverter  Delta-E
Max. Rapid Travel Rate  30000mm/min
Max. Working Speed      45000mm/min
Repositioning Accuracy    -/+0.05mm/300mm
Traveling Positioning Accuracy -/+0.05mm/300mm
Driving System Delta servo motor 
Spindle power3.5KW Air cooling spindle
Spindle speed0-18000rpm/min
Working Voltage 380V/220V
G.W.1200kg
Double head co2 laser cutting machine for sale with affordable price
ZML-1390-2 double head CO2 laser cutting machine is equipped with a precision water cooled CO2 laser which can engrave on almost any non-metal materials surface. The CO2 laser engraving machine can also be used for cutting many different materials. With the Cylinder Rotary Attachment, you can engrave any cylindrical object, such as cup, brush pot, musical instrument and so on. The laser engraving machine supports multiple graphic formats, such as PLT/DXF/BMP/JPG/GIF/PGN/TIF and so on. The CO2 laser engraving machine is equipped with DSP Control System for CorelDraw&AutoCAD and other advanced software.The laser engraving machine is compatible with WIN10, WIN8, WIN7, Windows Vista and Windows XP.

Features of double head CO2 laser cutting machine

1. Configure 60Watt/80Watt/100Watt/130Watt/150Watt/180Watt CO2 sealed laser tube.
2. Automatic up and down platform.
3. Honey comb table.
4. Auto focus lens.
5. Profesional cooling device.
6. Profesional exhauster device.
7. Owns functions of restoring from power off, continuation on break point.
8. Transmit files directly in CorelDraw, AutoCAD etc.
9. Adopt international linear rail, more precision.

Application of double head CO2 laser cutting machine

CO2 laser cutter applicable industries:
CO2 Laser cutter is used for cloth, leather, toys, computer embroidery cutting, mould, crafts, bamboo and wood, advertising and building decoration, packaging and printing, paper products industries.
CO2 laser cutter applicable materials:
CO2 laser cutter is available for engraving and cutting hard nonmetal materials such as acrylic, color plates, ABS board, rubber, plastic, cloth toys, leather, wool, crystal, glass, ceramic tile, jade, bamboo, wood, etc.

Technical parameters of double head CO2 laser cutting machine

ModelZML-1390-2
Working Area1300mmx900mm
Laser Power60-180 W
Laser TypeCO2 glass laser tube
Working Speed0-60000mm/min
Preposition Accuracy±0.05mm
Cutting Thickness0~22mm Acrylic, other determinied by material
Position SystemRed dot
Graphic Format SupportedBMP, AI, DST, CDR, PLT, DXF, JPG, PGN
Software SupportedCorelDraw, Photoshop, AutoCAD, LaserCut, Tajima
Driving SystemStepper motor
Control SystemRuida
Cooling ModeWater cooling
Working VoltageAC220V, 50-60Hz 10A max
PackageWooden case

Detail Pictures of double head CO2 laser cutting machine

The difference between woodworking CNC cutting machine and woodworking carving machine
With the increasing demand of panel furniture, panel CNC cutting machine is also welcomed by more and more furniture enterprises. Both woodworking carving machine and CNC cutting machine are wood processing machinery. Woodworking CNC cutting machine is nothing more than cutting and carving modeling. Ordinary woodworking carving machine can also do it. Why buy the cutting machine?

Many customers have such questions. The price of CNC cutting machine is much higher than that of common multi process woodworking carving machine. What are the advantages that make many customers choose woodworking cutting machine? Here is the difference between woodworking carving machine and CNC cutting machine. The difference between CNC cutting machine woodworking carving machine and CNC cutting machine 1. Common woodworking carving machine or multi process woodworking carving machine can cut materials.

But its bed structure and mechanical parts decide that it can't carry out the cutting work for a long time, otherwise it will cause the bed deformation and mechanical accuracy to be lower and lower. The bed structure and accessories used by the cutting machine are much higher than the woodworking carving machine, which can adapt to the long-term cutting work, and the speed is very fast.

Different from the control system used by woodworking carving machine, the CNC cutting machine can optimize the cutting software with numerous designs and layouts, improve the utilization rate of plates, and the software can automatically open sheets and materials, which is incomparable to ordinary woodworking carving machine.

Material machine and engraving machine are also different in plate fixation: the material cutting machine is basically based on vacuum adsorption table, which requires the addition of adsorption pump as a part of the increase in cost. Many customers will say when they buy the machine that it is very good to process the whole board with the adsorption table, but it will be very power consuming to process small pieces of board and start the adsorption pump, so they want the table with dual-purpose suction clamp, but there is a deviation in this cognition, and its adsorption effect is not as good as that of the full adsorption table.

Now the adsorption table is divided into zones, and small plates can open a single adsorption area to save electricity. For the adsorption pump, there are two kinds: air-cooled and water-cooled. The air-cooled adsorption pump is noisy, but the water-cooled adsorption pump needs to pay attention to antifreeze in winter, so you can choose the appropriate adsorption pump according to the local climate.
Woodworking Edge Banding Machine RC-E05
Woodworking Edge Banding Machine RC-E05 is suitable for such plates: MDF, block board, solid wood board, particleboard, polymer door plates, plywood etc, straight line edging and trimming. Woodworking Edge Banding Machine has function: Gluing, end trimming, rouh trimming, fine trimming, scraping, buffing and so on. Edging smoothly and edging line is straight. The woodworking Edge Banding Machine is stable, reliable and durable, with favorable price. It is especially suitable for large and medium-sized furniture manufacturers. 

The CNC Router for Cabinet Making machine is our newly-developed CNC Router with combined function of material loading and unloading for cabinet-making, widely used in home decoration, shop and office furniture. CNC Router for Cabinet Making is equipped with Italy HSD Spindle, Italy Boring unit and advanced Syntec control system, Japanese Yaskawa servo and Taiwan reducers. CNC Router for Cabinet Making has strong vacuum table to suck tightly of the work piece.

Performance parameter

ModelRC-E05
Panel length≥120mm
Panel width≥80mm
Panel thickness10-60mm
Edge band thickness0.4-3mm
Feed speed12-20m/min
Air pressure6kg
Total power9.5kw
Dimensions4600*900*1600mm
Net weight1700kg

If you would like to know more about Woodworking Edge Banding Machine RC-E05,Woodworking Edge Banding,cnc router rc-e05, please contact us!
CO2 Laser Engraving & Cutting Machine for Sale with affordable price

Features of CO2 Laser Engraving & Cutting Machine

Reci laser tube, has good engraving performance, can use 4mA current in the high-frequency pulse engraving of the laser tube in pre-ionization state;
The RuiDa control system is the latest generation of laser engraving/cutting control system. The control system has better hardware stability and better resistance to high voltage and antistatic interference. Can preview the file graphics saved in the memory on the panel, the speed of the screen, the domestic manufacturers no one can;The processing parameters (such as speed, power, etc.) of each layer can be directly modified on the operation panel, and the modified layer parameters can be automatically saved for later use (this function cannot be implemented by other manufacturers) ;
Red Point: The red spot positioning lamp adopts imported laser diode and optical lens. Clear spot, low divergence, good collimation, small size, strong industrial applicability;
Cooling machine adopted Industrial water chiller CW-5000, install easier and could make sure better cooling system to extended working hours;Reci laser tube, has good engraving performance, can use 4mA current in the high-frequency pulse engraving of the laser tube in pre-ionization state;

Application of CO2 Laser Engraving & Cutting Machine

CO2 laser cutter applicable industries:
CO2 Laser cutter is used for cloth, leather, toys, computer embroidery cutting, mould, crafts, bamboo and wood, advertising and building decoration, packaging and printing, paper products industries.
CO2 laser cutter applicable materials:
CO2 laser cutter is available for engraving and cutting hard nonmetal materials such as acrylic, color plates, ABS board, rubber, plastic, cloth toys, leather, wool, crystal, glass, ceramic tile, jade, bamboo, wood, etc.

Technical Parameters of CO2 Laser Engraving & Cutting Machine

ModelZML-1325
Working Area1300mmx2500mm
Laser Power80/100/130/150 W
Laser TypeCO2 glass laser tube
Working Speed0-60000mm/min
Preposition Accuracy±0.05mm
Cutting Thickness0~22mm Acrylic, other determinied by material
Position SystemRed dot
Graphic Format SupportedBMP, AI, DST, CDR, PLT, DXF, JPG, PGN
Software SupportedCorelDraw, Photoshop, AutoCAD, LaserCut, Tajima
Driving SystemStepper motor
Control SystemRuida
Cooling ModeWater cooling
Working VoltageAC220V, 50-60Hz 10A max
PackageWooden case

Detail Pictures of CO2 Laser Engraving & Cutting Machine

Problems in using woodworking carving machine
Woodworking engraving machine is a kind of engraving machine specially designed for the customers of woodworking industry who have mass processing. It is suitable for carving and cutting cabinet doors, art relief screens, craft windows, furniture and works of art. For those sculptured objects with irregular shape, they seem to be fixed tightly on the surface, and they will shake back and forth when they are under pressure.

At this point, try to put some waste under the object to increase friction. The other is to keep the package of the article. Although the object is irregular, the package it carries may be very regular and easy to be fixed. With a small belt, the irregular shape object is easy to be fixed. Or try to fix the regular parts with tools, and abandon the irregular parts.

Check whether the pliers or card heads selected for carving are used wrongly. At the same time, the abrasion of the pliers or card heads of the woodworking carving machine will also lead to the dislocation of the carved objects. If the pliers or the clamp head is too tight, the moment when the knife head contacts the carved object will also lead to the ejection of the carved object. If the downward pressure on the carved object is large, consider whether you have to use the tapered nose. If the pressure on the diamond head of the carving machine is too large during the carving process, the pressure on the side of the tool will cause the movement of the carved object.

If an incorrect diamond knife is used, it can cause the same problem. A 90 or 100 degree diamond knife will go deep into the material and move the material as it is carved. For engraving plastic patterns, you can paste the transfer tape on the back of the object to be engraved, spray the side with the tape with liquid spray adhesive, and then paste it on a surface that can be discarded, so as to avoid the use of double-sided adhesive tape, leaving a surface that is difficult to clean.

Because the transfer tape is easy to peel and clean. Use special engraved tape, one side of which is more sticky than the other, so the plate can be moved or replaced at will. Because the woodworking carving machine is often equipped with multi-functional pliers or card heads, and they are made of iron, so it is easy to cause damage to the carved objects or make them slide down in the carving process, so it will be helpful to select some rubber caps or rubber pipes for the fixation of the carved objects.
Automatic high speed edge banding machine E06
Woodworking Edge Banding Machine RC-E06 is suitable for such plates: MDF, block board, solid wood board, particleboard, polymer door plates, plywood etc, straight line edging and trimming. Woodworking Edge Banding Machine has function: Gluing, end trimming, rouh trimming, fine trimming, scraping, buffing and so on. Edging smoothly and edging line is straight. The woodworking Edge Banding Machine is stable, reliable and durable, with favorable price. It is especially suitable for large and medium-sized furniture manufacturers.

 

This machine is suitable for linear edge banding of the work pieces of solid boards, fiber boards, particle boards, etc. The machine adopts high quality motor, imported electrical components, product serialization, customer choice diversification, with high precision, high efficiency characteristics.



Technical Parameters:

ModelRCE06
Panel length≥100mm
Panel width≥100mm
Panel thickness10-60mm
Edge band thickness0.4-2mm
Feed speed12-20m/min
Air pressure6kg
Total power10.4kw
Dimensions4500*900*1550mm
Net weight1700kg

How to install the cutting tool of CNC woodworking lathe

Features

CO2 laser marking machine is specially developed for non-metals marking industry by Consure Laser Company. This machine was equipped with original American RF and high-speed galvanometer,the speed is extremely fast and the precision is very high. The machine performance is steady and can continuously working 12 hours. The optical system is fully sealed, it can prevent the dust enters laser body and reduces the equipment failure rate.

Specification

ModelCO2 30WCO2 RF30WSplit CO2 RF 30W CS-FD50
Laser Power30W RF Metal tube
Wave length of laser1064nm
Marking Area110mm*110mm/140*140mm/ 210*210mm/ 300*300mm
Cooling WaysAir cooling
Linear Speed≤7000mm/s
 
CO2 Laser marking machine can be used for marking leather, wood, textiles, plastics, acrylic, glass, crystal, stone, MDF, dual-color board, organic glass, paper, jade, agate, non-metals etc.
| 1 | 2 | 3 | 4 | 5 | 最初 | next>>